Turbo Primer has been engineered too effectively remove contaminates and increase the cure speed of Turbo Fuse cyanoacrylates. The effectiveness of Turbo Primer is dependable in a number of difficult applications particularly when bonding Polyolefins such as Polyethlene or Polypropolyene.

Turbo Primer also increase the ability to bond other difficult materials as Silicone, rubber and thermoplastics elastomers.


User Instructions:
Turbo Primer can be used by simply spraying it on the parts you wish to bond, or the parts can be dipped in the Turbo Primer. Allow to evaporate for about 30 seconds and then ond parts with Turbo Fuse Cyanoacrylates. After the parts are primed they do not have to be boned at once. The Turbo Primer generally has a prime-time of twenty-four hours. For the best results bonding should take place within 60 minutes of priming.

Keep the primed area free of contamination or handling.

Turbo Primer will not effect the setting time of Turbo Fuse. Ultimate setting will be achieved with-in 24 hours.