| IDENTITY:
TURBOFUSE |
|
| Section I -
Manufacturer Information |
| |
Manufacturer's Name: |
Palm Labs Inc. |
|
| |
Address: |
|
|
| |
Street: |
7 Office Park Road |
|
| |
Telephone Number for Information: |
(843) 686-2345 fax:(843)
686-2230 |
|
| |
City, State, ZIP: |
Hilton Head, SC 29928 |
|
| |
Date Prepared: |
3/29/07 |
|
| |
| Section II
- Hazardous Ingredients/Identity Information |
| |
Hazardous Components
(Specific Chemical Identity; Common Name(s)) |
Ethyl Cyanoacrylate, "Super-Glue" |
|
| |
OSHA PEL |
none |
|
| |
ACGIH TLV |
none |
|
| |
| Section III
- Physical/Chemical Characteristics |
| |
Boiling Point: |
149° Fahrenheit |
|
| |
Specific Gravity:
(H20=1.0) |
1.046 |
|
| |
Vapor Pressure (mm/Hg.): |
0.17 @ 20° C. |
|
| |
Solubility in Water: |
Insoluble |
|
| |
Evaporation Rate
(Butyl Acetate=1): |
none |
|
| |
Appearance and Odor: |
Clear, Acrid Odor |
|
| Section IV
- Fire And Explosion Hazard Data |
| |
Flash Point (method used): |
Greater than 200° F. |
|
| |
Extinguishing Media: |
Foam or Carbonic Acid |
|
| |
Special Fire Fighting
Procedures: |
Firefighters should wear
self-contained breathing apparatus. |
|
| |
Unusual Fire and Explosion Hazards: |
none |
|
| Section V -
Reactivity Data |
| |
Stability: |
Stable |
|
| |
Incomapatible Materials to Avoid: |
Water, Bases, Alcohol |
|
| |
Hazardous Decomposition
Or Byproducts: |
|
| |
Polymerization |
Will Not Occur |
|
| |
Conditions to Avoid |
Storage in contact with
or near heat, moisture, sunlight. |
|
| Section VI
- Health Hazard Data |
| |
Routes of Entry: |
|
|
| |
Inhalation? |
Yes |
|
| |
Skin? |
No |
|
| |
Health Hazards (Acute
And Chronic) |
|
| |
Inhalation: |
Irritating to mucus membrane.
Causes headache. |
|
| |
Skin: |
Bonds instantly, do not
pull apart. Soak in warm soapy water or apply acetone or polish remover. |
|
| |
Carcinogenicity: |
none |
|
| |
OSHA Regulated?: |
no |
|
| |
Signs & Symptoms
of Exposure: |
|
| |
Inhalation: |
Throat irritation, coughing.
Remove to fresh air. |
|
| |
Medical Conditions Generally
Aggravated by Exposure: |
Respiratory condition |
|
| |
Emergency and First
Aid Procedure: |
|
| |
Inhalation: |
Remove to fresh air. |
|
| |
Skin: |
Soak in warm soapy water
or acetone. Do not pull apart, will separate by itself. |
|
| Section VII
- Precautions for Safe Handling and Use |
| |
Steps to Be Taken in
Case Material is Released or Spilled: |
Flush with copious amounts
of cool water. Allow to harden and break up and dispose of normally. |
|
| |
Waste Disposal Method: |
Dispose of as chemical
waste in accordance with current local, state and federal regulations. |
|
| |
Precautions to be Taken
in Handling and Storing: |
Material should be handled
and stored in a cool, dry area. Containers should be kept tightly closed.
Avoid storage in sunlight. For best results material should be refrigerated. |
|
| Section VIII
- Control Measures |
| |
Respiratory Protection
(Specify Type): |
|
| |
Local Exhaust: |
OK |
|
| |
| |
Protective Gloves: |
Yes |
|
| |
Eye Protection: |
Goggles |
|
| |
|
|
| IDENTITY:
TURBOSET I |
BACK |
| Section I -
Manufacturer Information |
| |
Manufacturer's Name: |
Palm Labs Inc. |
|
| |
Address: |
|
|
| |
Street: |
200 Professional Bldg.,
New Orleans Rd. |
|
| |
Telephone Number for Information: |
(843) 686-2345 fax:(843)
686-2230 |
|
| |
City, State, ZIP: |
Hilton Head, SC 29928 |
|
| |
Date Prepared: |
4/27/07 |
|
| |
| Section II
- Hazardous Ingredients/Identity Information |
| |
Hazardous Components
(Specific Chemical Identity; Common Name(s)) |
Synthetic Hydrocarbon |
|
| |
OSHA PEL |
300 |
|
| |
ACGIH TLV |
|
|
| |
TSCA |
Registry Number Proprietary
CAS 64742-48-9 |
|
| |
DOT |
Petroleum Distillate
N.O.S. UN1268 III |
|
| |
CERCLA |
No special reporting if
spilled, contact local authorities. |
|
| |
SARA |
Title III Hazard Class,
Fire |
|
| |
| Section III
- Physical/Chemical Characteristics |
| |
Boiling Point: |
320-351° Fahrenheit |
|
| |
Specific Gravity:
(H20=1.0) |
0.75 |
|
| |
Vapor Pressure (mm/Hg.): |
2mmHg./100° C. |
|
| |
Melting Point: |
less than 32° F. |
|
| |
Solubility in Water: |
Less than .01% @ 77 F. |
|
| |
Evaporation Rate
(Butyl Acetate=1): |
0.3 (approximate) |
|
| |
Appearance and Odor: |
Clear colorless liquid
with light naphtha odor. |
|
| Section IV
- Fire And Explosion Hazard Data |
| |
Flash Point (method used): |
104 F. (TCC) |
|
| |
Flammable Limits:
(@77° F.) |
LEL - 1.2
UEL - 9.6 |
|
| |
Extinguishing Media: |
Foam or dry chemical, water mist to
cool. |
|
| |
Special Fire Fighting
Procedures: |
Water spray to cool surfaces
and protect personnel. Foam or dry chemical to extinguish. Avoid spraying
water into storage. |
|
| |
Unusual Fire and Explosion
Hazards: |
Can release vapors that
form combustible mixtures at or above flashpoint. |
|
| Section V -
Reactivity Data |
| |
Stability: |
Stable |
|
| |
Incomapatible Materials to Avoid: |
none |
|
| |
Hazardous Decomposition
Or Byproducts: |
|
| |
Polymerization |
Will Not Occur |
|
| |
Conditions to Avoid |
none |
|
| Section VI - Health Hazard Data |
| |
Routes of Entry: |
|
|
| |
Inhalation? |
Yes |
|
| |
Skin? |
Low Toxicity |
|
| |
Ingestion? |
Minimal Toxicity |
|
| |
Health Hazards (Acute
And Chronic) |
|
| |
Inhalation: |
High vapor concentrations
are irritating to eyes and respiratory tract. May cause headache and
dizziness. |
|
| |
Ingestion: |
Get medical help. Do not
induce vomiting. |
|
| |
Carcinogenicity: |
none |
|
| |
OSHA Regulated?: |
Combustible |
|
| |
Signs & Symptoms
of Exposure: |
|
| |
See Above |
|
| |
Medical Conditions Generally
Aggravated by Exposure: |
Respiratory, if very high
concentration. |
|
| |
Emergency and First
Aid Procedure: |
|
| |
Eyes: |
Eyes- Flush with water
until irritation subsides, if irritation continues get medical help. |
|
| |
Skin: |
Wash skin with soap/water.
Remove clothes, wash before reuse. |
|
| Section VII - Precautions for
Safe Handling and Use |
| |
Steps to Be Taken in
Case Material is Released or Spilled: |
Eliminate sources of ignition.
Small spills, allow to dry or cleanup with absorbent material. This
material will be combustible. |
|
| |
Waste Disposal Method: |
Consult an expert on waste
disposal to ensure conformity to local regulations. |
|
| |
Precautions to be Taken
in Handling and Storing: |
None for safety. Product
will last longer if stored in a cool and dry environment. |
|
| |
Other Precautions: |
Do not spray near sources
of ignition, open fires, lit cigarettes etc. |
|
| Section VIII - Control Measures |
| |
Respiratory Protection (Specify
Type): |
None specific, local ventilation adequate. |
|
| |
Local Exhaust: |
OK |
|
| |
| |
Protective Gloves: |
Yes |
|
| |
Eye Protection: |
Yes |
|
| |
Work/Hygienic Practices: |
Standard solvent - use
work practices as if with Naphtha. |
|
EMAIL US AT:
