Please select a product:

• Turbo Fuse 15-110
  
• Turbo Fuse 15-120
  
• Turbo Fuse 15-130
  
• Turbo Fuse 15-140
  
• Turbo Fuse 15-150
  
• Turbo Fuse 15-170
  
• Turbo Fuse 15-180
  
• Turbo Fuse 15-190
  
• Turbo Fuse Gel 07-200
  
  

Palm Lab's cyanoacrylate is a one component rapid bonding adhesive.  TurboFuse's advanced formula is designed to polymerize instantly by absorbing surface moisture.  The productís performance has been tested with a variety of materials, and is recommended for a multitude of applications.  The fast curing qualities make it especially desirable in high speed industrial production.  Turbo Fuse is ideal for use in applications that require good "wicking" characteristics and/or in close fitting applications.

Base Compound (resin):

Appearance:

Viscosity Cp:

Specific Gravity:

Flash Point:

Shelf Life:

Ethyl Cyanoacrylate

Clear Liquid

2-5

1.05

180° Fahrenheit

One Year

Appearance:

Softening Temperature:

Service Temperature:

Hardness Barcol:

Dielectric Constant (@ 1 Mhz):

Specific Resistance:

Clear, Hard

300° Fahrenheit

-65° to 180° Fahrenheit

65

3.33

8.6 x 10² ohms/cm

Aluminum to Aluminum:

Steel to Steel:

Phenolic to Phenolic:

Acrylic to Acrylic:

Rubber to Rubber:

10-15 seconds

10-15 seconds

3-5 seconds

5-10 seconds

3-5 seconds

Because of the 15-110's low viscosity, it works especially well in close fitting applications such as broken ceramic repair, metal to metal bonding and rubber to rubber such as "O" ring repair/manufacture. 15-110 has additional impact absorbing capabilities not normally associated with Cyanoacrylates.

Palm Lab's cyanoacrylate is a one component rapid bonding adhesive. Turbo Fuse's 15-120 advanced formula is designed to polymerize instantly by absorbing surface moisture. The productís performance has been tested with a variety of materials, and is recommended for bonding plastics and can solve a multitude of applications. The fast curing qualities make it especially desirable in high speed industrial production. 15-120 is ideal for use in applications that require an easily handled low viscosity adhesive. This product will fill minor gaps (.002" - .004") between parts to be adhered, such as rough machined metal.

Base Compound (resin):

Appearance:

Viscosity Cp:

Specific Gravity:

Flash Point:

Shelf Life:

Ethyl Cyanoacrylate

Clear Liquid

30-40

1.05

180° Fahrenheit

One Year

Appearance:

Softening Temperature:

Service Temperature:

Hardness Barcol:

Dielectric Constant (@ 1 Mhz):

Specific Resistance:

Clear, Hard

300° Fahrenheit

-65° to 180° Fahrenheit

65

3.33

8.6 x 10² ohms/cm

Aluminum to Aluminum:

Steel to Steel:

Phenolic to Phenolic:

Acrylic to Acrylic:

Rubber to Rubber:

10-15 seconds

10-15 seconds

5-7 seconds

7-10 seconds

5-7 seconds

Because of the 15-120's viscosity, it works especially well in close to medium fitting applications such as broken ceramic repair, unfinished metal to metal bonding and metal to rubber such as "O" ring repair/manufacture. This product is a very good, easy to handle general purpose adhesive.

Palm Lab's cyanoacrylate is a one component rapid bonding adhesive. Turbo Fuse 15-130's advanced formula is designed to polymerize instantly by absorbing surface moisture. The productís performance has been tested with a variety of materials, and is recommended for a multitude of applications. The fast curing qualities make it especially desirable in high speed industrial production. Turbo Fuse 15-130 is ideal for use in applications that require an easily handled low viscosity adhesive. This product will fill minor gaps (.002" - .004") between parts to be adhered such as rough machined metal.

Base Compound (resin):

Appearance:

Viscosity Cp:

Specific Gravity:

Flash Point:

Shelf Life:

Ethyl Cyanoacrylate

Clear Liquid

90-100

1.05

180° Fahrenheit

One Year

Appearance:

Softening Temperature:

Service Temperature:

Hardness Barcol:

Dielectric Constant (@ 1 Mhz):

Specific Resistance:

Strength Psi-Tensile Shear:

Clear, Hard

300° Fahrenheit

-65° to 180° Fahrenheit

65

3.33

8.6 x 10² ohms/cm

2,500

Aluminum to Aluminum:

Steel to Steel:

Phenolic to Phenolic:

Acrylic to Acrylic:

Rubber to Rubber:

10-15 seconds

10-15 seconds

5-7 seconds

7-10 seconds

5-7 seconds

Because of the 15-130's viscosity, it works especially well in close to medium fitting applications such as broken ceramic repair, unfinished metal to metal bonding, metal to rubber and rubber to rubber such as "O" ring repair/manufacture. This product is a very good, easy to handle general purpose adhesive.

Palm Lab's cyanoacrylate is a one component rapid bonding adhesive. Turbo Fuse 15-140's advanced formula is designed to polymerize virtually instantly by absorbing surface moisture. The productís performance has been tested with a variety of materials, and is recommended for a multitude of applications. The fast curing qualities make it especially desirable in high speed industrial production. Turbo Fuse 15-140 is ideal for use in applications that require an easily handled low/medium viscosity adhesive. This product will fill minor gaps (.003" - .005") between parts to be adhered such as rough machined metal and plastic.

Base Compound (resin):

Appearance:

Viscosity Cp:

Specific Gravity:

Flash Point:

Shelf Life:

Ethyl Cyanoacrylate

Clear Liquid

180-220

1.05

180° Fahrenheit

One Year

Appearance:

Softening Temperature:

Service Temperature:

Hardness Barcol:

Dielectric Constant (@ 1 Mhz):

Specific Resistance:

Clear, Hard

300° Fahrenheit

-65° to 180° Fahrenheit

65

3.33

8.6 x 10² ohms/cm

Aluminum to Aluminum:

Steel to Steel:

Phenolic to Phenolic:

Acrylic to Acrylic:

Rubber to Rubber:

12-15 seconds

12-15 seconds

5-8 seconds

7-12 seconds

5-7 seconds

Because of the 15-140's viscosity, it works especially well in medium fitting applications such as ceramic repair, unfinished metal to metal bonding, metal to rubber and rubber to rubber such as "O" ring repair/manufacture. This product is a very good, easy to handle general purpose adhesive.

Palm Lab's cyanoacrylate is a one component rapid bonding adhesive. Turbo Fuse 15-150's advanced formula is designed to polymerize instantly by absorbing surface moisture. The productís performance has been tested with a variety of materials, and is recommended for a multitude of applications. The fast curing qualities make it especially desirable in high speed industrial production. Turbo Fuse 15-150 is ideal for use in applications that require an easily handled low viscosity adhesive. This product will fill minor gaps (.002" - .004") between parts to be adhered such as rough machined metal.

Base Compound (resin):

Appearance:

Viscosity Cp:

Specific Gravity:

Flash Point:

Shelf Life:

Ethyl Cyanoacrylate

Clear Liquid

450-5500

1.05

180° Fahrenheit

One Year

Appearance:

Softening Temperature:

Service Temperature:

Hardness Barcol:

Dielectric Constant (@ 1 Mhz):

Specific Resistance:

Clear, Hard

300° Fahrenheit

-65° to 180° Fahrenheit

65

3.33

8.6 x 10² ohms/cm

Aluminum to Aluminum:

Steel to Steel:

Phenolic to Phenolic:

Acrylic to Acrylic:

Rubber to Rubber:

10-15 seconds

10-15 seconds

5-7 seconds

7-10 seconds

5-7 seconds

Because of the 15-150's viscosity, it works especially well in close to medium fitting applications such as broken ceramic repair, unfinished metal to metal bonding, metal to rubber and rubber to rubber such as "O" ring repair/manufacture. This product is a very good, easy to handle general purpose adhesive.

Palm Lab's cyanoacrylate is a one component rapid bonding adhesive. Turbo Fuse 15-170's advanced formula is designed to polymerize instantly by absorbing surface moisture. The productís performance has been tested with a variety of materials, and is recommended for a multitude of applications. The fast drying qualities make it especially desirable in high speed industrial production. Turbo Fuse 15-170 is widely used in the Aerospace, Automotive and Electronic Industries.

Base Compound (resin):

Appearance:

Viscosity Cp:

Specific Gravity:

Flash Point:

Shelf Life:

Ethyl Cyanoacrylate

Clear Liquid

900-1200

1.05

180° Fahrenheit

One Year

Appearance:

Softening Temperature:

Service Temperature:

Hardness Barcol:

Dielectric Constant (@ 1 Mhz):

Specific Resistance:

Clear, Hard

300° Fahrenheit

-65° to 180° Fahrenheit

65

3.33

8.6 x 10² ohms/cm

Aluminum to Aluminum:

Steel to Steel:

Phenolic to Phenolic:

Acrylic to Acrylic:

Rubber to Rubber:

50-60 seconds

50-60 seconds

15-20 seconds

20-30 seconds

5-10 seconds

Because of the Turbo Fuse 15-170's high viscosity, it works especially well in bonding porous surfaces and is excellent for bonding metal and rubber parts.

Palm Lab's cyanoacrylate is a one component rapid bonding adhesive. Turbo Fuse 15-180's advanced formula is designed to polymerize instantly by absorbing surface moisture. The productís performance has been tested with a variety of materials, and is recommended for a multitude of applications. The fast curing qualities make it especially desirable in high speed industrial production. Turbo Fuse 15-180 is ideal for use in applications that require a relatively thick, viscous adhesive that will fill gaps between surfaces and is also ideal for applications on vertical or angled surfaces.

Base Compound (resin):

Appearance:

Viscosity Cp:

Specific Gravity:

Flash Point:

Shelf Life:

Ethyl Cyanoacrylate

Clear Liquid

2400

1.05

180° Fahrenheit

One Year

Appearance:

Softening Temperature:

Service Temperature:

Hardness Barcol:

Dielectric Constant (@ 1 Mhz):

Specific Resistance:

Clear, Hard

300° Fahrenheit

-65° to 180° Fahrenheit

65

3.33

8.6 x 10² ohms/cm

Aluminum to Aluminum:

Steel to Steel:

Phenolic to Phenolic:

Acrylic to Acrylic:

Rubber to Rubber:

15-20 seconds

20-25 seconds

10-15 seconds

10-15 seconds

5-7 seconds

Because of the 15-180's high viscosity, it works especially well in poor fitting applications such as rough metal or ceramic repair, unfinished metal to metal bonding and metal to rubber. This product is a very good, thick, almost gel like adhesive that will fills gaps of .005" to .010".

Palm Lab's cyanoacrylate is a one component rapid bonding adhesive. Turbo Fuse 15-190's advanced formula is designed to polymerize instantly by absorbing surface moisture. The productís performance has been tested with a variety of materials, and is recommended for a multitude of applications. The fast curing qualities make it especially desirable in high speed industrial production. Turbo Fuse 15-190 is ideal for use in applications that require a relatively thick, viscous adhesive that will fill gaps between surfaces and is also ideal for applications on vertical or angled surfaces.

Base Compound (resin):

Appearance:

Viscosity Cp:

Specific Gravity:

Flash Point:

Shelf Life:

Ethyl Cyanoacrylate

Clear Liquid

3600-4400

1.05

180° Fahrenheit

One Year

Appearance:

Softening Temperature:

Service Temperature:

Hardness Barcol:

Dielectric Constant (@ 1 Mhz):

Specific Resistance:

Clear, Hard

300° Fahrenheit

-65° to 180° Fahrenheit

65

3.33

8.6 x 10² ohms/cm

Aluminum to Aluminum:

Steel to Steel:

Phenolic to Phenolic:

Acrylic to Acrylic:

Rubber to Rubber:

15-20 seconds

20-25 seconds

10-15 seconds

10-15 seconds

5-7 seconds

Because of the 15-190's high viscosity, it works especially well in poor fitting applications such as rough metal or ceramic repair, unfinished metal to metal bonding and metal to rubber. This product is a very good, thick, almost gel like adhesive that will fills gaps of .005" to .010".

Palm Lab's cyanoacrylate is a one component rapid bonding adhesive. Turbo Gel's advanced formula is designed to polymerize instantly by absorbing surface moisture. The productís performance has been tested with a variety of materials, and is recommended for a multitude of applications. The fast curing qualities make it especially desirable in high speed industrial production. Turbo Gel is ideal for use in applications that require a Gel-like, viscous adhesive that will fill gaps between surfaces and is also ideal for applications on vertical, angled or overhead surfaces. For extreme gap fill, the use of an accelerator is highly recommended.

Base Compound (resin):

Appearance:

Viscosity Cp:

Specific Gravity:

Flash Point:

Shelf Life:

Ethyl Cyanoacrylate

Clear White Gel

Not Applicable, Thixotropic Gel

1.05

180° Fahrenheit

One Year

Appearance:

Softening Temperature:

Service Temperature:

Hardness Barcol:

Dielectric Constant (@ 1 Mhz):

Specific Resistance:

Tensile Strength - Alum to Alum:

Clear, Hard

300° Fahrenheit

-65° to 180° Fahrenheit

65

3.33

8.6 x 10² ohms/cm

3770 psi

Aluminum to Aluminum:

Steel to Steel:

Phenolic to Phenolic:

Acrylic to Acrylic:

Rubber to Rubber:

15-20 seconds

20-25 seconds

10-15 seconds

10-15 seconds

5-7 seconds

* All times assume good fit before assembly. *

Because of the Turbo-Gel's thick consistency, it works especially well in poor fitting applications such as rough metal or ceramic repair, unfinished metal to metal bonding and metal to rubber. This product is a very good, thick, almost gel like adhesive that will fills gaps of .005" to .010". It is extremely good in vertical and overhead applications.